SC To SC UPC Duplex Single Mode OS2 9/125 Fiber Optic Patch Cord
SC To SC UPC Duplex Single Mode OS2 9/125 Fiber Patch Cord or Fiber Patch Cable or Fiber jumper cables, PVC or LSZH or OFNP Or OFNR Material Cable Jacket 2.0mm or 3.0mm Cable Diameter,Fiber Grade G.657 A1,A2 or G.652.D with Different Cable Length from 1m(3ft) ,2m(7Ft),3m(10Ft) 5m(16ft)…..or other Length Produce Base On Customer Request are used for connections to CATV (Cable Television), telecommunication networks, computer fiber networks and fiber test equipment. Applications include communication rooms, FTTH (Fiber to The Home), LAN (Local Area Network), FOS (fiber optic sensor), Fiber Optic Communication System, Optical fiber connected and transmitted equipment, Defense combat readiness, etc.
Indoor SC To SC UPC Duplex Single Mode OS2 Fiber Patch Cord Patch Cable, often called fiber optic patch cord or fiber jumper cable, is a fiber optic cable terminated with fiber optic connectors on both ends. It has two major application areas: computer work station to outlet and fiber optic patch panels or optical cross connect distribution center. Fiber optic patch cables are for indoor applications only.
Features of SC To SC UPC Duplex Single Mode Fiber Patch Cord
- Non-optical disconnect performance
- High quality zirconia ferrules
- Low insertion loss and high return loss
- Materials meet RoHS requirements
- Riser, Plenum, and LSZH fiber jumper cord available
Applications SC To SC UPC Duplex Single Mode Fiber Patch Cable
- Computer networks
- CATV networks
- Active device termination
The 9/125μm OS2 single mode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can also save more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed.
This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. It can transport data for up to 10km at 1310nm, or up to 40km at 1550nm.
Industry Standard Fiber Optic Cable SC To SC UPC Duplex Single Mode The fiber optic cable has industry standard flammability rating PVC or LSZH or OFNP Or OFNR jacket and duplex fiber connector which meets EIA/TIA 604-2 for high speed cabling networks.
G.657.A1 Bend Insensitive Fiber (BIF) Cable can be stapled and bent around corners without sacrificing performance.
10mm Minimum Bend Radius The bend performance improves duct utilization, enabling smaller enclosures.
Zirconia Ceramic Ferrule Optimum IL and RL ensure stable signal transmission, protecting your network safety.
A unique refractive trench with low refractive index glass layer in Bend Insensitive Fiber (BIF), which reduces in light dispersion upon twisting and bending, ensuring network transmission stably and fast.
Quality production Stages For Fiber Optic Patch Cord or Fiber Optic jumper cables
So what should be taken into consideration when choosing a ‘good’ product? What are the features that one should look for that defines the quality of any connector or jumper assembly? In order to appreciate the significance of a standard compliant product, one must first understand the process of actually making an optical connector assembly and the potential problems that could occur at each of the stages.
There are three main processes in the termination of a jumper Patch Cable, Preparation, Termination and Polishing and a total of 15 steps where negligence at any one of the steps will result in an inferior jumper assembly. Each process consists of small steps, and each step requires strict Quality Control of not only the equipment used, but also how each step is carried out.
preparation of fiber cable
- Stripping of outer cable jacket
- trimming of kevlar fibers to length
- Stripping of 900um buffer
- clean bare fiber
- check fiber for damage
- mix two part epoxy
- degas epoxy
- check ferule id
termination of fiber cable
- inject epoxy and insert fiber
- crimp kevlar to back post
- crimp outer jacket
- cure connector in oven
polishing of connector end face
- cleave fiber
- Remove excess epoxy by hand or machine
- polish end-face by grinding machine
Quality control steps For Fiber Optic Patch Cable SC To SC UPC Duplex Single Mode
Comprehensive performance testing makes sure the cable work more secure and data transmission more reliable and stable in your network.
End-Face Inspection Evidently, fiber end-face defects like scratches, pits, cracks, and particle contamination will have a direct impact on the performance, contributing to poor insertion/return loss. Any irregularity that impedes light transmission from one fiber to the other will negatively affect IL and RL.Inspect the connector end face for scratches, defects and contamination to ensure reliable fiber connections.
2-Insertion Loss Testing
Insertion Loss Testing In telecommunications, insertion loss refers to the loss of signal power, calculated as a ratio in dB (decibel), resulting from inserting a device in a transmission line or optical fiber. It can also be referred to as attenuation, which indicates how much the signal loss is by comparing the input power to the output power. A lower insertion loss value indicates a better insertion loss performance. For example, an insertion loss of 0.3dB is better than 0.5dB.
3-Return Loss Testing
Return Loss Testing When a signal is transmitted through a transmission line, some signal power is always reflected or returned to the source due to discontinuities in the transmission line. The discontinuity can be a mismatch with the terminating load or with a device inserted in the line. Return loss refers to the loss of reflected signal power. Therefore, the higher the return loss is, the lower the amount of reflection will be. That is to say, the fiber connector will have better performance with a higher value of RL.
4-3D Interferometer Testing
3D Interferometer Testing Test connectors or ferrules of cables to ensure that radius of curvature, the apex offset and fiber height can meet and exceed industry standards.
Polarity Testing Measure the polarity to ensure data from Tx at one end can be properly transmitted to Rx at the other end via light signals.
Packing & Labeling SC To SC UPC Duplex Single Mode Fiber Optic Patch Cable
This easy to take and well-protected fiber optical cable package has been labeled and marked by us as default. Customized and OEM label or package solution are available on request.
2m sc-sc fiber patch cord, sc sc duplex patch cord, sc sc fiber optic patch cord, sc sc patch cord, sc sc patch cord full form, sc sc patch cord meaning, sc to sc fiber patch cord, sc to sc patch cord, sc to sc patch cord price, sc to sc patch cord price in india, sc to sc patch cord price in pakistan, sc-sc duplex zip sm 3 metre patch cord, sc-sc fiber patch cord, sc-sc fiber patch cord price, sc-sc patch cables, sc-sc patch cord price,patch cord de fibra sc-sc, patch cord de fibra optica sc-sc,patch cord fibra optica sc sc, patch cord во sc-sc duplex sm 9 / 125 3м
sc to sc patch cord single mode, sc-sc patch cord single mode, sc-sc single mode fiber patch cord, sc-sc single mode patch cord price, sc-sc sm patch cord,
patch cord and pigtail, patch cord cable price, patch cord color code, patch cord duplex, patch cord fiber, patch cord fiber optic, patch cord fibra optica, patch cord hs code, patch cord in optical fiber, patch cord online, patch cord optical fiber, patch cord pigtail, patch cord price, patch cord test, patch cord types, yellow patch cord,fiber jumper cables,fiber jumper patch cable,fiber optic jumper cable,fiber patch cable types,fiber patch cables
indoor patch cable , indoor patch cord
SC To SC UPC Duplex Single Mode OS2 9/125 Fiber Patch Cord
Henry (verified owner) –
Zohar (verified owner) –
Max (verified owner) –
Robert (verified owner) –
Very well worth the money.
Bryan (verified owner) –
Very well worth the money.
Bryan (verified owner) –
Very well worth the money.