- Description
-
10m Cisco SFP-10G-AOC10M Compatible 10G SFP+ Active Optical Cable
QSFP/QSFP+ Passive Electrical Loopback is used for testing QSFP/QSFP+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing. The is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host. It provides an economical way to exercise QSFP/QSFP+ ports during R&D validation, production testing, and field testing. The provides QSFP/QSFP+ power Class 1, 2, 3 (standard), or 4 loading using a customer supplied +3.3V voltage supply.
:0px;padding:0px”>
Features
Customizable power consumption
Dual LED indicator
Custom Memory Maps
Built in diagnostic functions
Supports 40Gbps total data rate
Host-pluggable MSA footprint
Full SFF-8436 MSA Compliant
Temperature range from 0◦ to 80◦C
No reference clock required
Compliant with SONET, SDH, GBE, FC
MSA Compliant EEPROMFeatures
¨ Electrical interface compliant to SFF-8431
¨ Hot Pluggable
¨ 850nm VCSEL transmitter, PIN photo-detector receiver
¨ Up to 300m on OM3 MMF
¨ Operating case temperature: 0 to 70℃
¨ All-metal housing for superior EMI performance
¨ RoHS compliant (lead free)
Applications
¨ 10 Gigabit Ethernet
¨ 4G and 8G Fibre Channel Applications
¨ 1x InfiniBand QDR. DDR, SDR
¨ High-performance computing clusters
¨ Servers, switches, storage and host card adapters
Description
MeFiberOptic SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. MeFiberOptic SFP+ Active Optical Cables’s length is up to 300 meters on OM3 MMF.
SFP+ AOC Specifications
Economical QSFP/QSFP+ Port Testing
Custom Memory Maps
Board Level System Testing
Excellent Signal Integrity
Application
QSFP Port/System Testing
ITU-T Recommendation G.957 (STM-1, 4 & 16)
Ethernet IEEE 802.3 (Gigabit, 10 Gigabit and 40 Gigabit Ethernet) SDR, DDR and QDR
SONET, SDH, GBE, FC Support, InfinibandParameter
Description
Module Form Factor
SFP+ (Supports SFF8431/SFF8432/SFF8472)
Protocols Supported
InfiniBand, Ethernet, Fiber Channel
Channel Data Rate
Rate 1 to 10.3125Gbps
BER
-12
Operating Case Temperature
0 to + 70oC
Storage Temperature
-20 to + 85oC
Supply Voltage
3.3V
Supply current
230mA per end typical
Management Interface Serial
I2C (Supports SFF8472)
.5px;background-color:#FFFFFF”>
Optical characteristicsThe following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
Parameter
Symbol
Min.
Typical
Max
Unit
Notes
Transmitter
Center Wavelength
λt
840
850
860
nm
RMS spectral width
Pm
–
–
Note 1
nm
Average Optical Power
Pavg
-6.5
–
-1
dBm
2
Extinction Ratio
ER
3.5
–
–
dB
3
Transmitter Dispersion Penalty
TDP
–
–
3.9
dB
Relative Intensity Noise
Rin
–
–
-128
dB/Hz
12dB reflection
Optical Return Loss Tolerance
–
–
12
dB
Receiver
Center Wavelength
λr
840
850
860
nm
Receiver Sensitivity
Psens
–
–
-11.1
dBm
4
Stressed Sensitivity in OMA
–
–
-7.5
dBm
4
Los function
Los
-30
–
-12
dBm
Overload
Pin
–
–
-1.0
dBm
4
Receiver Reflectance
–
–
-12
dB
Note:
1. Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.
2. The optical power is launched into MMF
3. Measured with a PRBS 231-1 test pattern @10.3125Gbps
4.Measured with a PRBS 231-1 test pattern @10.3125Gbps,BER≤10-12.
Ordering information
Part Number
Product Description
SFP-10GAOC-1
1 meter SFP+ Active Optical Cable
SFP-10GAOC-2
2 meter SFP+ Active Optical Cable
SFP-10GAOC-3
3 meter SFP+ Active Optical Cable
SFP-10GAOC-5
5 meter SFP+ Active Optical Cable
SFP-10GAOC-7
7 meter SFP+ Active Optical Cable
SFP-10GAOC-10
10 meter SFP+ Active Optical Cable
SFP-10GAOC-XX
10G SFP+ Active Optical Cable up to 300m on OM3 MMF
xxx :001~100,1~300 Length in meters(OM3 fiber is available)
10m Cisco SFP-10G-AOC10M Compatible 10G SFP+ Active Optical Cable
$66.00
Cisco Genuine
SFP-10G-AOC10M
Vendor Name
MeFiberOptic
Connector Type
SFP+ to SFP+
Max Data Rate
10Gbps
Cable Type
Active Optical Cable
Cable Length
10m(32.8ft)
Commercial Temperature Range
0 to 70°C (32 to 158°F)
Description
Reviews (0)
Be the first to review “10m Cisco SFP-10G-AOC10M Compatible 10G SFP+ Active Optical Cable” Cancel reply
Related products
FOCC
Your best partner For fiber optic products with 15 years of experience.Wholesale with competitive price and quality in China
Our Email:
Check our contact page
Our phone number:
+86-755 29360455
Our Address:
4th Floor, Building 1, YiJiaYang Science and Technology Park, No.159 HuaWang Road,Longhua District Shenzhen
Reviews
There are no reviews yet.