Name: FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm
Brand: MeFiberOptic.Com
SKU: M12542
Price: 0.64 USD
Availability: InStock
Rating: 4.5 (2 reviews)

What Is FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm?

FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm is optical fiber that has an optical connector pre-installed on one end and a length of exposed fiber at the other end .basically used to splice with the fiber so that they can be connected to the patch panel or equipment. They also present a feasible and reliable solution for easier fiber termination, effectively saving operating time and labor cost.

FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations.
Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box

FC type connectors have 2.5 mm diameter ferule structure. The abbreviations PC, UPC and APC are definitions expressing the physical differences of the surface geometries of the connectors on the ceramic ferrules. UPC (Ultra Physical Contact) indicates that the ceramic ferule structure on the connector has an extra polished flat structure; APC (Angled Physical Contact) indicates that the ceramic ferrule structure on the connector has an extra polished 8° angle structure.

0.9 mm diameter pigtail cables are manufactured with easy-to-strip tubes and ITU-T G651.OM3 bend sensitive fibers, then assembled at one end with FC type connector. TIA / EIA-598 color standard is used for 12-color pigtail sets.

Specifications

Insertion Loss (IEC 61300-3-4-Method-B): ≤ 0.30 dB
Return Loss (IEC 61300-3-6-Method-B): ≥ 35 dB (UPC)
Durability: 500 matings
Flammability: UL94 V-0
Operating Temperature: -40°C to +85°C
Connector End Face Geometry: IEC 61755-3
LC Connector Compliance: IEC 61754-20, TIA 604-10-A, RoHS
SC Connector Compliance: IEC 61754-4, TIA 604-3, RoHS
FC Connector Compliance: IEC 61754-13, TIA 604-4-A, RoHS
ST Connector Compliance: IEC 61754-2, TIA 604-2, RoHS
LSH Connector Compliance: IEC 61754 – 15, TIA 604 – 16, RoHS

FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm

Singlemode vs multimode

Please be free to buy our FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm products with competitive price. The customized service and the quotation consultation are available.

Quality production Stages For FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm

So what should be taken into consideration when choosing a ‘good’ FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm? What are the features that one should look for that defines the quality of any connector,pigtail or jumper assembly? In order to appreciate the significance of a standard compliant product, one must first understand the process of actually making an optical connector assembly and the potential problems that could occur at each of the stages.

Production Process Fiber Patch Cord or Fiber Optic Patch Cable or Fiber Optic jumper cables

There are three main processes in the termination of a Fiber Optic Pigtail, Preparation, Termination and Polishing and a total of 15 steps where negligence at any one of the steps will result in an inferior pigtail assembly. Each process consists of small steps, and each step requires strict Quality Control of not only the equipment used, but also how each step is carried out.

preparation of fiber cable

Stripping of outer cable jacket
trimming of kevlar fibers to length
Stripping of 900um buffer
clean bare fiber
check fiber for damage
mix two part epoxy
degas epoxy
check ferule id

termination of fiber cable

inject epoxy and insert fiber
crimp kevlar to back post
crimp outer jacket
cure connector in oven

polishing of connector end face

cleave fiber
Remove excess epoxy by hand or machine
polish end-face by grinding machine

How to Strip Fiber Optic Pigtail with Tri-Hole Fiber Stripper?

A Variety of Applications for Different Equipments

Widely used in CATV, FTTH/FTTX, telecommunication networks, premise installations, data processing networks, LAN/WAN network, and more.

Mefiberoptic.com is one of the leading China manufacturers and suppliers providing you with FC/UPC Pigtail | Multi Mode G651.OM3 | 0.9mm. Our factory has applied the most advanced equipment and technology to better serve you.