Fiber Optic OTDR Lauch Cable Box Singlemode with SC/APC Connector,2km
An Optical OTDR Launch Cable Box with a distance of 2km and SC connectors is a device used in fiber optic testing to improve the accuracy of measurements taken with an optical time-domain reflectometer (OTDR). The launch cable box is designed to be used with single-mode fiber optic cables, which are commonly used in long-distance telecommunications applications.
The launch cable box typically consists of a spool of fiber optic cable that is several kilometers long, wound inside a protective case. The cable is terminated with SC connectors on both ends, which can be easily connected to the OTDR and the fiber under test.
The 2km distance specification refers to the length of the fiber optic cable inside the launch cable box. This length is designed to provide a known distance for the OTDR signal to travel before it reaches the fiber under test. By using a known distance, the OTDR can accurately measure the loss and reflectance of the first connector and can eliminate the “dead zone” that occurs when the OTDR pulse is reflected back from the connector.
The SC connectors on the launch cable box are a type of push-pull connector that is commonly used in fiber optic networks. They are designed to be easy to install and remove, and they provide low insertion loss and high return loss, which are important characteristics for accurate fiber optic testing.
Overall, an Optical OTDR Launch Cable Box with a distance of 2km and SC connectors is a valuable tool for fiber optic testing and troubleshooting, as it helps to improve the accuracy and reliability of OTDR measurements.
Designed to aid in the testing of fiber optic cable when using an OTDR.The OTDR Launch Fiber box is used with Optical Time Domain Reflectometers (OTDR’s to help minimize the effects of the OTDR’s launch pulse on measurement uncertainty.Available in many different configurations and fiber lengths.
- Water and dust prove allowing the unit to be taken into almost any environment
- Case can house up to 2,000meters.
- Pulse Suppressor,Launch Box,Delay Line,Installation/Testing,Training,Calibration.
- Compound Latch for positive seal and easy opening with locking feature.
- Nonmetal construction will not dent, corrode, or conduce electricity.
- Water and dust prove allowing the unit to be taken into almost any environment.
- Case can house up to 2,000 meters of fiber.
- Auto Purge Valve for changes in altitude and temperature .
Specifications of Optical OTDR Launch Cable Box
|23.8 x 14.1 x 6.7 cm / 13.5 x 9 x 4.3 cm
|0.75 kg (without fiber)
Ordering Information LB-[A]-[B]-[C]-[D]
|A = Input connector
|B = Output connector
|C = Fiber
|D = Length(km)
|S–Single mode fiber
|M6–Multi mode fiber (62.5/125)
|M5–Multi mode fiber (50/125)
|FCA – FC/APC
|FCA – FC/APC
|OM3 – Corning 50/125 (350)
|SCA – SC/APC
|SCA – SC/APC
|G657A – TKH G.657A 9/125
Note: Other special adaptors or connectors are available upon request.
MeFiberOptic.Com is one of the largest and best optical otdr launch cable box distance 2km with sc connector manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized optical otdr launch cable box distance 2km with sc connector in stock with our factory. Also, free sample is also available if necessary.
Hot Tags: optical OTDR launch cable box distance 2km with SC connector manufacturers, suppliers, factory, wholesale, customized, buy, bulk, in stock, free sample, fiber optical otdr launch cable box