MTRJ Fiber Optic Adapter

MTRJ Fiber Optic Adapter

MTRJ Fiber Optic Adapter occupies approximately the same space as a simplex SC adapter. When used in conjunction with the SixPaxs panel, the MT-RJ duplex adapter fits most LGX* style hardware, offering more user-friendly characteristics in high density applications

High-precision Ceramic Sleeve Top level ceramic sleeve ensure stable optical performance.

Excellent Optical Performance Ultra Low Insertion Loss : 0.5db-0.2dB Excellent Repeatability and durability Good Temperature stability

Fiber Optic Adapter Applications A fiber optic adapter a designed to connect two ends of a fiber optic cable with high precision,it is Widely applied in cable television network, LAN & WAN, fiber optic access network and video transmission.

The MT-RJ connector was developed to meet growing customer demands for smaller, lower cost, and easier-to-use fiber optic connectivity. The MT-RJ reduces the space required on panels, wall plates and in closets by 50% throughout the network.
This small form factor connector is ideal for fiber-to-the-desk applications. The design meets TIA requirements. The MT-RJ uses an improved version of an industry standard RJ-45 type plug. This combination of a small form factor connector with the familiar RJ-45 latching mechanism ensures the MT-RJ connector to be the perfect choice for horizontal cabling needs to the desk-top.

Products in the MT-RJ connector solution family will include: field mountable connectors, duplex patchcords, hybrid patchcords, pigtails, duplex adapters for MT-RJ cut-outs, as well as SC cut-outs, SixPaxs™ panels, hand polishing tooling,and consumable kits.

The MT-RJ adapter occupies approximately the same space as a simplex SC adapter. When used in conjunction with the SixPaxs panel, the MT-RJ duplex adapter fits most LGX* style hardware, offering more user-friendly characteristics in high density applications

Product Specification

Fiber Optic Adapters / Couplers MTRJ Fiber Optic Adapter

Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad).

Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).

When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). A mismatch here will cause attenuation in one direction (where the larger fiber is transmitting light into the smaller fiber).

Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.

Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.

Fiber Optic Adapter or Coupler Types

Wiki

https://mefiberoptic.com/product/lc-upc-fiber-optic-attenuator-male-to-female-125db/

https://mefiberoptic.com/product/mtrj-fiber-optic-connector/