3m Cisco SFP-10G-AOC3M Compatible 10G SFP+ Active Optical Cable

Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+)

QSFP/QSFP+ Passive Electrical Loopback  is used for testing QSFP/QSFP+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing. The  is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host. It provides an economical way to exercise QSFP/QSFP+ ports during R&D validation, production testing, and field testing. The  provides QSFP/QSFP+ power Class 1, 2, 3 (standard), or 4 loading using a customer supplied +3.3V voltage supply.

Features

Customizable power consumption
Dual LED indicator
Custom Memory Maps
Built in diagnostic functions
Supports 40Gbps total data rate
Host-pluggable MSA footprint
Full SFF-8436 MSA Compliant
Temperature range from 0◦ to 80◦C
No reference clock required
Compliant with SONET, SDH, GBE, FC
MSA Compliant EEPROMFeatures

¨         Electrical interface compliant to SFF-8431
¨         Hot Pluggable
¨         850nm VCSEL transmitter, PIN photo-detector receiver
¨         Up to 300m on OM3 MMF
¨         Operating case temperature: 0 to 70℃
¨         All-metal housing for superior EMI performance
¨         RoHS compliant (lead free)

Applications

¨         10 Gigabit Ethernet
¨         4G and 8G Fibre Channel Applications
¨         1x InfiniBand QDR. DDR, SDR
¨         High-performance computing clusters
¨         Servers, switches, storage and host card adapters
Description

MeFiberOptic SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. MeFiberOptic SFP+ Active Optical Cables’s length is up to 300 meters on OM3 MMF.

SFP+ AOC Specifications
Economical QSFP/QSFP+ Port Testing
Custom Memory Maps
Board Level System Testing
Excellent Signal Integrity
Application

QSFP Port/System Testing
ITU-T Recommendation G.957 (STM-1, 4 & 16)
Ethernet IEEE 802.3 (Gigabit, 10 Gigabit and 40 Gigabit Ethernet) SDR, DDR and QDR
SONET, SDH, GBE, FC Support, Infiniband

:0cm;margin-bottom:15px;padding:0px;color:#858586;font-family:’Lucida Grande’, ‘Lucida Sans Unicode’, Arial, Verdana, sans-serif;font-size:13px;line-height:19.5px;white-space:normal;background-color:#FFFFFF;”>
Optical characteristics

The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Note:

1. Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.

2. The optical power is launched into MMF

3. Measured with a PRBS 2³¹-1 test pattern @10.3125Gbps

4.Measured with a PRBS 2³¹-1 test pattern @10.3125Gbps,BER≤10^-12.

Ordering information