8 Fiber Port &1 UTP lan port Fiber optic ethernet switch ，Fiber Media Converter

8 Fiber Port &1 UTP lan port  Fiber optic ethernet switch ，Fiber Media Converter

Multi-gigabit optical aggregation series is my company based independent software research and development from a fiber aggregation switches, which have 8 * 1000M optical ports and 2 * 10/100 / 1000M adaptive Ethernet electrical interface. , Transmission distance: Multimode: 550m; Single-mode: 20/40/80 / 120KM (optional).

Multi-gigabit optical convergence convergent series fiber optic switch is a photoelectric signal switch Gigabit Ethernet (Gigabit Fiber Switch) of electrical and optical signals multiplexed centralized exchange used, it meets IEEE802.3z / A standard, MTBF: > 70,000 hours

□ 8 * 1000Base-X optical ports and 2 * 1000Base-T electrical interface composition;

□ Standard: IEEE802.3z / A;

□ Ethernet electrical interface supports full-duplex and half-duplex network communication, with auto-negotiation capability;

□ Ethernet port supports AUTO-MDIX (crossover cable and straight-line adaptive);

□ High backplane bandwidth, two-story full wire-speed packet forwarding rate of exchange;

□ can detect when the optical signal is lost for the end of the fiber optic equipment down or nowhere, and through the LED indicates alarm;

□ light switch electrical ports are 10/100 / 1000M auto-sensing ports, the device according to the connected electrical outlet hear each other to set their own rate highest rate;

□ unrepeated transmission distance of up to 2∽120 kilometers;

□ Optical interface Optional: single fiber / dual fiber, single-mode / multi-mode;

□ Interface: SC / FC / ST / LC LC (SFP) (default);

□ Power supply: External power supply DC5V; 3A, built-in power AC220V;

Ethernet port

Quantity: 1

Type: RJ45,10 / 100 / 1000M,

Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptive

Protocol: IEEE 802.3, IEEE 802.1Q (VLAN)

MAC address table: 4096 MAC addresses can be learned

Physical interface: RJ45 seat support (cross / straight-line adaptive) Auto-MDIX

Optical Interface

Quantity: 8

Type: SFP, 1000M

Wavelength: singlemode 1310nm / 1550nm

            Multimode 850nm / 1310nm (optional)

Fiber Count: single fiber / dual-fiber (optional)

Transmission power: -9dBm∽-5dBm

Transmission Length: singlemode 20/40/60/80/100 / 120km

          Multimode 2km (optional)

Receiving sensitivity: Better than -36dBm

Connector: SC / FC / LC, default: SFP

Mechanical properties

Housing: IP30 protection grade, metal

Installation: Desktop, wall-mounted

Industry Standard

EMI: FCC Part 15. CISPR (EN55022) class A

Industry: IEC6100-6-2

Railway: EN50155.EN50121-4

Transportation: NEMA TS-2

Coal: GB / T3836.1 / 2/3/4

Machinery: IEC68-2-6 / 27/32

working environment

Operating temperature: 0 ~ 50 ℃

Storage temperature: -20 ~ 70 ℃

Relative humidity: 5 to 90% (non-condensing)

power supply 

Power: DC5V; 3A (external)

      AC220V (built-in)