12 Fiber Port &12 UTP lan port Fiber optic ethernet switch ，Fiber Media Converter

12 Fiber Port &12 UTP lan port Fiber optic ethernet switch ，Fiber Media Converter

Multi-gigabit optical aggregation series is my company based independent software research and development from a fiber aggregation switches, which have 8 * 1000M optical ports and 2 * 10/100 / 1000M adaptive Ethernet electrical interface. , Transmission distance: Multimode: 550m; Single-mode: 20/40/80 / 120KM (optional).

Multi-gigabit optical convergence convergent series fiber optic switch is a photoelectric signal switch Gigabit Ethernet (Gigabit Fiber Switch) of electrical and optical signals multiplexed centralized exchange used, it meets IEEE802.3z / A standard, MTBF: > 70,000 hours

1. □ 12 * 1000Base-X optical ports and 2 * 1000Base-T electrical interface composition;
2. □ Standard: IEEE802.3z / A;
3. □ Ethernet electrical interface supports full-duplex and half-duplex network communication, with auto-negotiation capability;
4. □ Ethernet port supports AUTO-MDIX (crossover cable and straight-line adaptive);
5. □ High backplane bandwidth, two-story full wire-speed packet forwarding rate of exchange;
6. □ can detect when the optical signal is lost for the end of the fiber optic equipment down or nowhere, and through the LED indicates alarm;
7. □ light switch electrical ports are 10/100 / 1000M auto-sensing ports, the device according to the connected electrical outlet hear each other to set their own rate highest rate;
8. □ unrepeated transmission distance of up to 2∽120 kilometers;
9. □ Optical interface Optional: single fiber / dual fiber, single-mode / multi-mode;
10. □ Interface: SC / FC / ST / LC LC (SFP) (default);
11. □ Power supply: External power supply DC5V; 3A, built-in power AC220V;

Ethernet portQuantity: 1Type: RJ45,10 / 100 / 1000M,Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptiveProtocol: IEEE 802.3, IEEE 802.1Q (VLAN)MAC address table: 4096 MAC addresses can be learnedPhysical interface: RJ45 seat support (cross / straight-line adaptive) Auto-MDIXOptical InterfaceQuantity: 12Type: SFP/LC, 1000MWavelength: singlemode 1310nm / 1550nm Multimode 850nm / 1310nm (optional)Fiber Count: single fiber / dual-fiber (optional)Transmission power: -9dBm∽-5dBmTransmission Length: singlemode 20/40/60/80/100 / 120km Multimode 2km (optional)Receiving sensitivity: Better than -36dBmConnector: SC / FC / LC, default: SFPMechanical propertiesHousing: IP30 protection grade, metalInstallation: Desktop, wall-mountedIndustry StandardEMI: FCC Part 15. CISPR (EN55022) class AIndustry: IEC6100-6-2Railway: EN50155.EN50121-4Transportation: NEMA TS-2Coal: GB / T3836.1 / 2/3/4Machinery: IEC68-2-6 / 27/32working environmentOperating temperature: 0 ~ 50 ℃Storage temperature: -20 ~ 70 ℃Relative humidity: 5 to 90% (non-condensing)power supply Power: DC5V; 3A (external) AC220V (built-in)