What NSN Boot CPRI Optic Patch Cord Duplex LC Fiber RRU RRH Cable FTTA ?
NSN Boot CPRI Optic Patch Cord with flexible boots is the ideal design for outdoor fiber cable applications. Such product can meet the FTTA(fiber to the Antenna) program requirements for outdoor environment conditions. Especially in the 3G, 4G,5G Base station (BBU to RRU). CPRI fiber patch cable are rapidly becoming the standard connector interface.The bulkhead cutout allows for removal of transceiver through the bulkhead. And the cable is Water proof, dust proof and corrosion resistant.
Mobile network operators are required, now more than ever before, to modernize their network infrastructures in order to keep up with continuous high-bandwidth growth. To meet subscriber expectations, many mobile operators are switching from legacy “copper-to-the-antenna” to fiber-to-the-antenna (FTTA) infrastructures. Moreover, to add capacity and coverage for LTE & 5G services, they are deploying distributed antenna system (DAS) networks and small cells. DAS manufacturers are increasingly using the NSN BOOT CPRI protocol as the go-to interface between base stations and DAS head-ends.
NSN boot LC fiber optic FTTA outdoor patch cord, compatible with Nokia’s FullAXS-LC waterproof connector for latest and next-generation mobile communication systems(Such as UMTS, GSM, CMDA2000, TD-SCDMA, WiMAX, LTE and so on.) deploy fiber-optic feeders to link the telecom tower base station with the remote unit at the antenna mast.
LC/LC FTTA outdoor fiber patch cord NSN Boot CPRI Optic Patch Cord available in 2 core and 4 core combinations can carry control or message signals with minimum loss. FTTA outdoor fiber patch cord is designed for the quick and iterative distributing & retrieving under harsh environment. CPRI LC/LC FTTA cable is can armored with SUS flexible spring tube, portable, flexible, oil-resistant, rubbing-resistant, flame retardant, high tension load and wide operating temperature range. Its applications include quick deployment, military, mining, oil field, TV broadcasting, and communication emergency repair.Ideal for outside cabling application-Armored steel tape for rodent resistance-Pressure resistance-Fully water-blocked-Moisture blocking loose tubes-Fiber 2 core or 4 core
Easy Operation, reliable and cost-effective
CPRI Cable compatible with NSN Boot DX LC Connector, CPRI Fiber Cable for Nokia Base Station
FTTA outdoor patch cord, compatible with Nokia’s FullAXS-LC waterproof connector for latest and next-generation mobile communication systems(Such as UMTS, GSM, CMDA2000, TD-SCDMA, WiMAX, LTE and so on.) deploy fiber-optic feeders to link the telecom tower base station with the remote unit at the antenna mast.
Duplex tight-buffer fiber + central loose tube/ armoured steel tube + kevlar + OD 5.0mm / 7.0mm jacket cable, connected with NSN boot LC DX connector.
The Common Public Radio Interface (CPRI) standard
defines an interface between Radio Equipment Control (REC) and Radio Equipment (RE). Oftentimes, CPRI links are used to carry data between cell sites and base stations.The purpose of CPRI is to allow replacement of a copper or coax cable connection between a radio transceiver (used example for mobile-telephone communication and typically located in a tower) and a base station (typically located at the ground nearby), so the connection can be made to a remote and more convenient location.This connection (often referred to as the Fronthaul network) can be a fiber to an installation where multiple remote base stations may be served. This fiber supports multi mode communication and doesn’t support single mode communication. The fiber end is connected with the transceiver device called Small form-factor pluggable transceiver.
The companies working to define the specification include Ericsson AB, Huawei Technologies Co. Ltd, NEC Corporation, Alcatel Lucent and Nokia.
Application
1.Multi-purpose Outdoor.
2.For connection between distribution box and RRH(RRU).
3.Deployment in Remote Radio Head cell tower applications.
FTTA & FTTH Base station, BTS installation, BBU to RRU Indoor/outdoor building cabling – Harsh environments application – Long haul networking -Direct burial and aerial lashing
Features
- Easily add/install jumper cables for a future expansion.
- Low insertion loss and added loss.
- Height of attenuation.
- Flexibility with small bending radius and excellent cable routing properties.
- End-face geometry and quality superior than IEC and Telcordia standards.
- The material in the jumpel cable are all-weather and UV-resistant.
- Mechanical performance: IEC 61754-20 standard.
- RoHS and REACH materials compliant.
Fiber Type | SM | MM |
Connector Type | LC | |
Insertion Loss(Typical) | 0.12 | 0.12 |
Insertion Loss(Max) | 0.25 | 0.25 |
Return Loss | ≥ 50dB(UPC) | ≥ 35dB |
≥ 60dB(APC) | ||
Durability | (1000 matings) < 0.2dB | |
Interchangeability | < 0.2dB | |
Operation Temperature | -40℃ ~ +75℃ | |
Storage Temperature | -40℃ ~ +85℃ |
Type | SM-UPC | SM-APC | MM-UPC | |||
Typical | MAX | Typical | MAX | Typical | MAX | |
Insertion loss | ≤0.1 | ≤0.3dB | ≤0.15 | ≤0.3dB | ≤0.05 | ≤0.3dB |
Return loss | ≥50dB | ≥60dB | ≥30dB | |||
Durability | 500 mating cycles | |||||
Working temperature | -40 to + 85℃ |
armored patch cord cable-china cpri-china cpri cable-china cpri cable factory-china cpri cable supplier-CPRI 5G-cpri duplex fiber optic patch cord-cpri fiber cable-cpri ftta patch cord-cpri optical fiber patch cord-crip fiber optic cable-fiber optic cpri cable-ftta outdoor patch cord patch cable lc duplex cpri patch cord-huawei cpri optical cable-lc duplex cpri patch cord-outdoor cpri cable-remote radio head-remote radio unit-SUS Sprial Armord-rru fiber wire-fiber optic cable for rru-pdlc cables rru cable-outdoor patch cable-rru jumper-nsn cable-nsn connector-nsn rru fiber optic connector-cpri-gyfjh 2a1a fiber optic cable-ftta fiber cpri armored cable-cpri optical cable-cpri cable-cpri lc lc armored cable-dlc fiber optical cable Blog wiki
Reviews
There are no reviews yet.