16 Fiber Port & 2GE Fiber & 2/4 UTP lan port Fiber optic ethernet switch-Fiber Media Converter

16 Fiber Port & 2GE Fiber & 2/4 UTP lan port Fiber optic Ethernet switch ，Fiber Media Converter

Multi-gigabit optical aggregation series is my company based independent software research and development from a fiber aggregation switches, which have 16 * 1000M optical ports and 2/4 * 10/100 / 1000M adaptive Ethernet electrical interface. , Transmission distance: Multimode: 550m; Single-mode: 20/40/80 / 120KM (optional).

Multi-gigabit optical convergence convergent series fiber optic switch is a photoelectric signal switch Gigabit Ethernet (Gigabit Fiber Switch) of electrical and optical signals multiplexed centralized exchange used, it meets IEEE802.3z / A standard, MTBF: > 70,000 hours

16 * 1000Base-X optical ports and2/ 4 * 1000Base-T electrical interface composition;

Standard: IEEE802.3z / A;

Ethernet electrical interface supports full-duplex and half-duplex network communication, with auto-negotiation capability;

Ethernet port supports AUTO-MDIX (crossover cable and straight-line adaptive);

High backplane bandwidth, two-story full wire-speed packet forwarding rate of exchange;

can detect when the optical signal is lost for the end of the fiber optic equipment down or nowhere, and through the LED indicates alarm;

light switch electrical ports are 10/100 / 1000M auto-sensing ports, the device according to the connected electrical outlet hear each other to set their own rate highest rate;

unrepeated transmission distance of up to 2∽120 kilometers;□ Optical interface Optional: single fiber / dual fiber, single-mode / multi-mode;

• Interface: LC (SFP)
• Power supply: built-in power AC220V;
• Ethernet port
• Quantity: 2/4
• Type: RJ45,10 / 100 / 1000M,
• Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptive
• Protocol: IEEE 802.3, IEEE 802.1Q (VLAN)
• MAC address table: 4096 MAC addresses can be learned
• Physical interface: RJ45 seat support (cross / straight-line adaptive) Auto-MDIX
• Optical Interface
• Quantity: 16
• Type: SFP/SC, 1000M
• Wavelength: singlemode 1310nm / 1550nm
• Multimode 850nm / 1310nm (optional)
• Fiber Count: single fiber / dual-fiber (optional)
• Transmission power: -9dBm∽-5dBm
• Transmission Length: singlemode 20/40/60/80/100 / 120km
• Multimode 2km (optional)
• Receiving sensitivity: Better than -36dBm
• Connector: SC / FC / LC, default: SFP
• Mechanical properties
• Housing: IP30 protection grade, metal
• Installation: Desktop, wall-mounted
• Industry Standard
• EMI: FCC Part 15. CISPR (EN55022) class A
• Industry: IEC6100-6-2
• Railway: EN50155.EN50121-4
• Transportation: NEMA TS-2
• Coal: GB / T3836.1 / 2/3/4
• Machinery: IEC68-2-6 / 27/32
• working environment
• Operating temperature: 0 ~ 50 ℃
• Storage temperature: -20 ~ 70 ℃
• Relative humidity: 5 to 90% (non-condensing)
• power supply Power: AC220V (built-in)