SC Female to SC Male Fiber Optic Attenuator

What Is SC Female to SC Male Fiber Optic Attenuator Plug in Fixed 5dB 10dB APC UPC ?

SC Female to SC Male Fiber Optic Attenuator  is a passive device used to reduce the power level of an optical signal. It is generally used in singlemode long-haul applications to prevent optical overload at the receiver. fiber optic attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications. Though its applications range widely, fixed attenuators are most commonly used for test and measurement, optical sensors, and telecommunications applications.

• Product Name : SC Female to SC Male Plug-in Fixed Fiber Optic Attenuator
• Operating Bandwidth : SM 1310/1550nm; MM 850nm
• Return Loss : SM UPC≥50dB,APC≥60dB; MM PC≥35dB
• Attenuation Tolerance : 1～5db±0.5db &6～25db±10%
• Max Optical Input Power : 200mw
• Operating Temp : -40°C to +85°C

SC female to SC male fiber optic attenuator is a device used in fiber optic communication to reduce the power level of an optical signal. It is a passive device that works by introducing a controlled amount of signal loss into the optical path.

The attenuator has a female SC connector on one end, which allows it to be connected to a standard SC patch cord. The other end of the attenuator has a male SC connector, which allows it to be connected to the equipment or device that is receiving the optical signal.

Attenuators are commonly used in fiber optic communication systems to prevent overloading of optical receivers and to improve the signal-to-noise ratio of the system. They can also be used to match the power levels of different optical components in the system, such as lasers and amplifiers.

The amount of signal loss introduced by an attenuator is typically measured in decibels (dB), and the attenuation value of an attenuator is specified by the manufacturer. Attenuators are available with various attenuation values, ranging from a few tenths of a dB to several tens of dB.

• Product Name : SC Female to SC Male Plug-in Fixed Fiber Optic Attenuator
• Operating Bandwidth : SM 1310/1550nm; MM 850nm
• Return Loss : SM UPC≥50dB,APC≥60dB; MM PC≥35dB
• Attenuation Tolerance : 1～5db±0.5db &6～25db±10%
• Max Optical Input Power : 200mw
• Operating Temp : -40°C to +85°C

Attenuators are an important component in fiber optic communication systems because they help to ensure that the optical signal is transmitted at the appropriate power level. They are especially useful in systems that use high-powered optical sources, such as long-haul transmission systems or CATV (cable television) distribution networks.

Attenuators can be made using different technologies, such as doped fiber, bulkhead connectors, or thin-film filters. Doped fiber attenuators are made by adding a controlled amount of dopant to the fiber core, which increases the attenuation of the fiber. Bulkhead connectors are simply a pair of connectors with a fixed amount of attenuation built into them. Thin-film filters are made by depositing a thin layer of material onto a glass substrate, which selectively reflects or transmits certain wavelengths of light.

SC connectors are a type of fiber optic connector that are commonly used in single-mode and multimode fiber optic systems. They are relatively easy to use and provide good performance and reliability. SC connectors have a push-pull locking mechanism that ensures a secure connection and makes them easy to install and remove.

When selecting an SC female to SC male fiber optic attenuator, it is important to choose an attenuator with the appropriate attenuation value for the application. Attenuation values are typically specified in dB, and the amount of attenuation required will depend on the specific system requirements. It is also important to choose an attenuator with high precision and low insertion loss to ensure accurate and reliable performance.

Female to male Fixed attenuators from OMC offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed attenuators can limit (attenuate) the amount of light passing through to the exact levels your project or application requirement. These precise attenuation levels provide for highly accurate performance. OMC’s SC Female to SC male Fixed fiber optic attenuator are available for SM UPC (1-25dB) and SM APC (1-25dB).Also we can offer LC/FC/ST/E2000/MU/MPO Female to male Fixed fiber attenuator

SC(F) to SC(M) Fixed Fiber Optic Attenuator Specifications:

SC Female to Male Fixed Fiber Optic Attenuator Drawing:

Products Materials:

Features:

•  Precise Attenuation Values
•  Low PDL&Insertion Loss
•  Precise Reflection Polishing
•  Fast Connection
•  Stable attenuation, highly Reliable
•  Complies with industry green initiative such as ROHS
•  GR910 Compliant

Fiber Optic Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single- mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications

Packaging: This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as de- fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized.

Looking for ideal Plug in Fixed Fiber Optic Attenuator 5dB 10dB APC UPC Manufacturer & supplier ? Mefiberoptic.com have a wide selection at good prices to help you get creative. All the Fiber Optic Attenuator 5dB 10dB APC UPC are quality guaranteed. We are China Origin Factory of SC Female to SC Male Plug in Fixed Fiber Optic Attenuator 5dB 10dB APC UPC. If you have any question, please feel free to contact us.