Mini Span ADSS Fiber Optic Cable 50-150 m
Mini Span ADSS Fiber Optic Cable 50-150 m Mini-Span includes ﬁber counts up to 96 optical ﬁbers and any type or combination of single-mode and laser-optimized multimode ﬁbers with the cable. Pole-to-Pole span lengths range from 50 feet to over 1000 feet, The lightweight, self-supporting cable allows rapid and economic deployment of the cable.
Mini-Span All-Dielectric Self-Supporting (ADSS) cable is designed for aerial distribution power lines. As its name indicates, there are no metallic components and the cable does not require a support or messenger wire. Mini-Span ADSS cables are a single jacket design intended for the shorter pole-to-pole span lengths in a distribution environment. The Mini-Span product families streamline aerial fiber optic hardware selection with various fiber counts in standardized diameters.
Application: Self-support Aerial installation
- Gel-filled tubes are reverse-oscillated to allow slack for mid-span access
- Up to 144 fibers in cable
- Full complement of attachment hardware available
- Pole-to-pole span lengths range from 50 feet to over 1000 feet
- Single jacket design decreases the diameter and weight when compared to double jacket ADSS cable
- No separation requirement of ADSS from conductors per National Electric Safety Code (NESC) section 235
- Show Less
- Electric utility distribution power lines – framed-in supply or communications space
- Underground duct
- Enterprise OSP networks
- Fiber-to-the-X (FTTx) networks
Span：50 feet to over 1000 feet.
Application: Self-support Aerial installation
- Suitable for use on distribution and high voltage transmission lines with mini spans or self-supporting installation for telecommunication ;
- Track -Resistant outer jacket available for the high voltage;
- Line where space potentials up to 35kv;
- Gel-Filled buffer tubes are S-Z stranded;
- Instead of Aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
- The fiber counts from 4-288 fibers.
Standards: Technology’s ADSS Fiber Optical Cable complies with IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794 standards
|Mode Field Diameter (um)||1310nm||9.1 ± 0.5|
|1550nm||10.3 ± 0.7|
|Attenuation Coefficient (dB/km)||1310nm||≤ 0.35|
|Attenuation Non-uniformity (dB)||≤ 0.05|
|Zero Dispersion Wavelength ( λ0) (nm)||1300 ～ 1324|
|Max Zero Dispersion Slope (S0max) (ps/(nm2·km))||≤ 0.093|
|Polarization Mode Dispersion Coefficient (PMDQ) (ps/km1/2)||≤ 0.2|
|Cut-off Wavelength (λcc) (nm)||≤ 1260|
|Dispersion Coefficient (ps/ (nm·km))||1288~1339nm||≤ 3.5|
|Effective Group Index of Refraction (Neff)||1310nm||1.466|
|Cladding Diameter (um)||125.0 ± 1.0|
|Cladding Non-circularity (%)||≤ 1.0|
|Coating Diameter (um)||245.0 ± 10.0|
|Coating-cladding Concentricity Error (um)||≤ 12.0|
|Coating Non-circularity (%)||≤ 6.0|
|Core-cladding Concentricity Error (um)||≤ 0.8|
|Curling (m)||≥ 4|
|Proof Stress (GPa)||≥ 0.69|
|Coating Strip Force (N)||Average Value||1.0 5.0|
|Peak Value||1.3 ~ 8.9|
|Macro Bending Loss (dB)||Ф60mm, 100 Circles, @ 1550nm||≤ 0.05|
|Ф32mm, 1 Circle, @ 1550nm||≤ 0.05|
|Fibers per Tube||2||4||4||4||12||12|
|Central Strength Member||Material||FRP||FRP coated PE|
|Water Blocking Material||Water blocking yarn|
|Additional Strength Member||Aramid yarns|
|Inner Jacket||Material||Black PE (Polythene)|
|Thickness||Nominal: 0.8 mm|
|Outer Jacket||Material||Black PE (Polythene) or AT|
|Thickness||Nominal: 1.7 mm|
|Cable Diameter (mm)||11.4||11.4||11.4||11.4||12.3||17.8|
|Cable Weight (kg/km)||94 ~ 101||94 ~ 101||94 ~ 101||94 ~ 101||119 ~ 127||241 ~ 252|
|Rated Tension Stress (RTS) (KN)||5.25||5.25||5.25||5.25||7.25||14.5|
|Maximum Working Tension (40%RTS) (KN)||2.1||2.1||2.1||2.1||2.9||5.8|
|Everyday Stress (15-25%RTS) (KN)||0.78 ~ 1.31||0.78 ~ 1.31||0.78 ~ 1.31||0.78 ~ 1.31||1.08 ~ 1.81||2.17 ~ 3.62|
|Allowable Maximum Span (m)||100|
|Crush Resistance (N/100mm)||Short time||2200|
|Suiting Meteorological Condition||Max wind speed: 25m/s|
Max icing: 0mm
|Bending Radius (mm)||Installation||20D|
|Attenuation (After Cable) (dB/km)||SM Fiber @1310nm||≤ 0.36|
|SM Fiber @1550nm||≤ 0.22|
|Temperature Range||Operation (℃)||-40 ~ +70|
|Installation (℃)||-10 ~ +50|
|Storage & Shipping (℃)||-40 ~ +60|
mini span adss cable Technical Parameter:
1. Only a part of Mini Span ADSS Fiber Cable are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Cables can be supplied with dry core or semi dry core
4. Specially designed Cable structure is available on request.
ADSS fiber optic cable (All-Dielectric Self-Supporting) fiber optic cable is a non-metallic cable which supports its own weight without the use of lashing wires or messenger cables.ADSS cable (All-Dielectric Self-Supporting) cable is ideal for installation in distribution as well as transmission environments, even when live-line installations are required. Adss Fiber As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass, making ADSS an economical and simple means of building a fiber optic network
ADSS cable is a type of fiber optic cable that is strong enough to support itself between structures without containing conductive metal elements. Both single mode and multimode fibers can be arranged in ADSS cables with a maximum of 144 fibers. ADSS fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures from pole-to-building to town-to-town installations. The cabling system that includes cables, suspension, dead-end, and termination enclosures offers a comprehensive transmission circuit infrastructure with high-reliability performance.
The structure of ADSS cable can be divided into two categories—central tube structure and stranded structure. In a central tube design, the fibers are placed in a PBT loose tube filled with water-blocking material within a certain length. Then they are wrapped with aramid yarn according to the desired tensile strength and extruded with PE (≤110KV electric field strength) or AT (≥100KV electric field strength) sheath. This structure features with small diameter and light weight but has limited lengths.
In a stranded structure design, the inner optical fibers and water-blocking grease are added into the fiber loose tube, and different loose tubes are wound around the central reinforcement (usually FRP). The rest parts are basically similar to the central tube structure. This type is able to obtain longer fiber lengths. Although the diameter and weight are relatively big, ADSS cables with this structure are better to be deployed for large span applications.
What Are the Benefits of ADSS Cables?
When it comes to aerial cablings or outside plant (OSP) deployments, ADSS cable will provide an efficient and optimal solution in most of the cases. The remarkable advantages of this ADSS fiber cable are twofold: reliable and cost-effective.
Fundamentally speaking, ADSS fiber optic cable is small in size, light in weight, strong in structure, and flexible in applications, which is suitable for most outside aerial deployments. The small and light nature of the ADSS cable will reduce the load on tower structures for some external influencing factors like cable weight, wind, ice, etc. The structure design will not only prevent moisture and chemical attacks but also will protect the polymer strength elements from the effect of solar ultraviolet light. Besides, the strong structure will also allow up to 700m lengths to be installed between support towers.
Economically speaking, as an alternative to OPGW (Optical Fiber Ground Wire) and OPAC (Optical Attached Cable) solutions, ADSS cable can provide a cost-effective solution by saving the money and the resources with easier installment and wider ranges. Adopting ADSS cables can exploit the considerable economic advantages offered by the installation of existing high voltage power lines. In addition, the installation of ADSS cables is faster and easier than previous aerial designs. Do not need support or messenger wires, a single pass is sufficient for installation. ADSS cable can be used for applications ranging from short span (40-50 meter) distribution lines to long-span transmission lines (300-500 meter spans) to extraordinary spans required by some river canyon crossings exceeding 1,800 meters.
What Are the Applications of ADSS Cables?
Originally, ADSS cable was developed from a military lightweight rugged deployable (LRD) field cable. With the continuous improvements, it is now used for short span aerial installations—typically on roadside power distribution poles. Since the ADSS cable is non-metallic, it is ideal for applications near high-voltage power distribution lines for which it has become a standard. Using single mode fibers and light wavelengths of either 1310 nm or 1550 nm, circuits up to 100 km long are possible without repeaters. Usually, ADSS was used in 48 and 96 cores. Here is a sketch of a normal ADSS cabling scenario:
In addition, ADSS fiber cable is also suited to single-point suspension applications such as down mine shafts or any application where the product has to support either a higher load than conventional terrestrial cable or a permanent or varying tensile load that is applied through the outer sheath. What’s more, ADSS can withstand the worst-case combinations of extreme weather, ice load, and wind environments, guaranteeing reliable communications in outdoor situations.
ADSS cable is ideal for installation in distribution as well as transmission environments. Since the ADSS cables provide an optimal solution for a broader combination of fiber counts and span lengths, more and more aerial cabling system designers tend to adopt them for telecommunications, like power utilities, telcos, and private network groups. Combining convenience and cost-effectiveness, an aerial fiber-optic deployment requires this kind of fiber optic cables for better performance.
|Attenuation (+20)||@850nm||≤3.0 dB/km||≤3.0 dB/km|
|@1300nm||≤1.0 dB/km||≤1.0 dB/km|
|Bandwidth (Class A)||@850nm||≥500 MHz·km||≥200 MHz·km|
|@1300nm||≥1000 MHz·km||≥600 MHz·km|
|Cable Cut-off Wavelength λcc||≤1260nm|