LC Uniboot 90 Degree Bent

LC Uniboot 90 Degree Bent

LC Uniboot 90 Degree Bent design allows one cable to carry both fibers, reducing cable congestion when routing, and is suitable to be used in high-density fiber patching in data centers which need space saving and reduce cable management troubles like Data Centers,Local Area Networks,High-Density Applications,Interconnects,oss-connects . Reverse-polarity design allows for quick and easy polarity conversion without exposing the fibers or needing any tools.

Application

1. Data Centers
2. Local Area Networks
3. High-Density Applications
4. Interconnects
5. oss-connects 

    

specification

1. Uniboot with a Single Housing
2. Low insertion loss and added loss.
3. Height of attenuation
4. High back loss, small volume, light
5. End-face geometry and quality superior than IEC and Telcordia standards
6. LSZH, OFNP, OFNR cable
7. Mechanical performance: IEC 61754-20 standard.
8. RoHS and REACH materials compliant.

 

Connector Types

 

Type	Reference	Note
LC	IEC 61754-20	Single mode	UPC: Blue connectors , White boots
		Multimode	UPC: Grey or Aqua Connectors , White boots

  

Dimensional Diagrams

 1.LC Uniboot (90 Degree Bent) 3.0mm patchcord

 

 

 

 

Patch cord versions 

Jumper tolerance requirement
Overall length (L)  （M）	length of tolerance（CM）
0＜L≤20	+10/-0
20＜L≤40	+15/-0
L＞40	+0.5%L/-0

 

Cable Structure

Cable Parameters

 

Fiber account	OD(mm)	Nominal Weight (kg/km)	Max.tensile Strength(N)		Max.Crush Resistance (N/100mm)		Min.Bending Radius(mm)
			Short-term	Long-term	Short-term	Long-term	Dynamic	Static
2	3.0±0.15	7.5	150	80	500	150	20D	10D

 

Optical Characteristics

 

Item	Parameter		Reference
	Single mode	Multimode
Insertion loss	Typical value≤0.15dB ; Maximum≤0.30	Typical value≤0.15dB ; Maximum≤0.30	IEC 61300-3-34
Return loss	≥ 50dB (UPC)	≥30dB (UPC)	IEC 61300-3-6

 

End-Face Geometry

 

Item	UPC (Ref: IEC 61755-3-1)	APC (Ref: IEC 61755-3-2)
Radius of curvature (mm)	7 to 25	5 to 12
Fiber height (nm)	-100 to 100	-100 to 100
Apex offset (μm)	0 to 50	0 to 50
APC angle (°)	/	8° ±0.2°
Key error (°)	/	0.2° max

 

End-Face Qualty (SM)

Zone	Range (μm)	Scratches	Defects	Reference
A: Core	0 to 25	None	None	IEC 61300-3-35:2015
B: Cladding	25 to 115	None	None
C: Adhesive	115 to 135	None	None
D: Contact	135 to 250	None	None
E: Rest of ferrule		None	None

 

End-Face Qualty (MM)

 

Zone	Range (μm)	Scratches	Defects	Reference
A: Core	0 to 65	None	None	IEC 61300-3-35:2015
B: Cladding	65 to 115	None	None
C: Adhesive	115 to 135	None	None
D: Contact	135 to 250	None	None
E: Rest of ferrule		None	None

 

Mechanical Characteristics

 

Test	Conditions	Reference
Endurance	500 matings	IEC 61300-2-2
Vibration	Frequency: 10 to 55Hz, Amplitude: 0.75mm	IEC 61300-2-1
Cable retention	100N (patch cable); 5N (pigtail)	IEC 61300-2-4
Strength of coupling mechanism	80N for 2 to 3mm cable	IEC 61300-2-6
Cable torsion	15N for 2 to 3mm cable	IEC 61300-2-5
Fall	10 drops, 1m drop height	IEC 61300-2-12
Static lateral load	1N for 1h (patch cable); 0.2N for 5min (pigtail)	IEC 61300-2-42
Cold	-25°C, 96h duration	IEC 61300-2-17
Dry heat	+70°C, 96h duration	IEC 61300-2-18
Change of temperature	-25°C to +70°C, 12 cycles	IEC 61300-2-22
Humidity	+40°C at 93%, 96h duration	IEC 61300-2-19