Compact 20-Piece Fiber Fusion-Splicing Tool Kit JW5001A – Portable Field Case with Stripper, Kevlar Scissors & Screwdriver Set
Take every essential fiber-splicing tool on-site in one rugged case. The JW5001A 20-piece kit pairs industry-standard CFS-2 strippers, Kevlar shears, jacket-removal pliers, cutters and a full 18-bit screwdriver set—everything you need for fast, reliable fusion splices in the field.
When you’re working miles from the lab, downtime is not an option. The JW5001A Compact Field Fiber Fusion-Splicing Tool Kit puts the core prep, cleaning and cable-management tools professionals rely on into a single, lightweight carry case. From trunk installations to last-mile FTTH drops, it keeps your workflow smooth, safe and standard-compliant.
Key Tools & Features
-
Dual-port CFS-2 fiber optic stripper – precise 250 µm & 125 µm coating removal without nicking fiber cladding.
-
Kevlar KC-1 scissors – hardened blades for aramid strength-member trimming.
-
Loose-tube / jacket stripper – clean 1.2-3.3 mm cable sheath removal for fusion or mechanical terminations.
-
7″ cable cutters & 6″ diagonal pliers – copper or messenger-wire prep.
-
Round-cable cutter – smooth circular jacket cuts on 3-18 mm outside diameters.
-
18-piece precision screwdriver set – flat, Phillips, Torx bits for enclosure hardware and splice-tray screws.
-
Alcohol-safe cleaning bottle & lint-free wipes – eliminate contamination before splicing (industry best practice).
-
Compact shock-resistant case – drop-tested, gasketed lid keeps tools organized and protected from rain / dust.
Benefits & Applications
| Benefit | Why It Matters on-site |
|---|---|
| All-in-one portability | Carry a single 2.3 kg kit instead of multiple loose tools. |
| Compliance-ready | Tools meet IEC-/TIA–approved prep tolerances for low-loss splices. |
| Faster roll-outs | Typical 40 % reduction in splice-prep time versus ad-hoc tool sets (internal field trials). |
| Versatile use cases | Ideal for OSP repairs, data-center moves/adds/changes, FTTH drops, and emergency restorations. |
Technical Specifications
| Parameter | JW5001A Value |
|---|---|
| Total tools | 20 pieces |
| Primary strippers | CFS-2 dual-hole (250 µm buffer / 125 µm cladding) |
| Kevlar shears | KC-1, 140 mm blade, serrated |
| Cable range (round-cutter) | Ø 3 – 18 mm |
| Screwdriver kit | 18 interchangeable bits + handle |
| Case size | 300 × 220 × 70 mm (≈ 11.8 × 8.7 × 2.8 in) |
| Weight | ≈ 2.3 kg (5 lb) including tools |
| Operating temp | -20 °C – +55 °C (tool metals) |
| Ingress protection | IP54 rated case when latched |
Specifications derived from manufacturer listing and standard tool models included in JW5001A.
4 | FAQ
| Question | Answer |
|---|---|
| Q1. Does the kit include a cleaver or fusion splicer? | No-JW5001A is a preparation kit. Pair it with your preferred cleaver and splicer model (e.g., Fujikura 90S or INNO View 7) for a complete solution. |
| Q2. Can I strip ribbon fiber? | The supplied CFS-2 is for single fibers. Add a dedicated ribbon stripper for 4-12 fiber ribbons. |
| Q3. Are replacement blades available? | Yes-standard CFS-2 and KC-1 replacement blades are stocked by most fiber-tool distributors. |
| Q4. Is the case airline carry-on compliant? | External dimensions fit typical 22 × 14 × 9 in overhead bin limits; verify current carrier regulations for tools. |
| Q5. What cleaning consumables are inside? | 250 ml solvent bottle (empty), lint-free wipes, 10 × 2.5 mm foam swabs-enough for ~200 splice preps. |
5 | Installation / Usage Steps
-
Set up a clean surface – open the case lid fully; foam organizers keep each tool visible.
-
Strip outer jacket with the round-cable cutter, then slide off loose-tube buffer using the jacket stripper.
-
Remove primary coating – position fiber in CFS-2 250 µm slot and pull smoothly to expose bare cladding.
-
Trim strength members – cut Kevlar yarn flush with KC-1 scissors.
-
Clean fiber – lint-free wipe soaked in 99 % IPA; inspect under fiber scope.
-
Proceed to cleaving and fusion splicing following your splicer’s procedures.
-
Re-pack tools – wipe blades, latch case, and store in a dry area.
Reviews
There are no reviews yet.