CS/UPC to CS/UPC Fiber Optic Adapter/Coupler SM 2 Channels

CS/UPC to CS/UPC Fiber Optic Adapter/Coupler 2 Channels (2F) OS2 Single Mode

CS/UPC to CS/UPC Fiber Optic Adapter/Coupler Single Channel (2F) OS2 Single Mode A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

The CS™ adapter can link two CS™ connectors precisely, allowing the light sources to be transmitted at most and lower the loss as much as possible. And this adapter has a smaller size and higher density when compared to an LC duplex adapter. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility.

Network uplinks need to move to higher speeds to match servers. The IEEE has released a new standard (IEEE 802.3.bs- 2017), but currently there are parallel and WDM transceiver structures for 200/400G QSFP-DD/OSFP, each needing 8 optical lanes. Due to the QSFP interface, 2X duplex LC connectors cannot fit in the QSFP-DD/OSFP form factor. There- fore, network customers have requested a new LC design to fit the QSFP-DD/OSFP interface. In response, Senko has developed solutions incorporating CS Connectors/Adapter for use with QSFP-DD and OSFP transceivers to increase port density in 100/200/400G applications.

OMC offer Senko’s new CS Adapter is specifically designed for CS Connector. CS Adapters offer reduced ferrule pitch and higher density than LC connectors, and they support next-generation 200/400G QSFP-DD and OSFP transceivers.

Optical Performance

 

 

Test item	(SM-9/125) UPC	(SM-9/125) APC	MM PC
Insertion Loss	≤0.2dB	≤0.2dB	≤0.2dB
Return Loss	≥50 dB	≥60 dB	≥35 dB
Durability (500 Mating)	0.1dB Max.
Withdrawal force (g/f)	2.0N ~ 5.9N (200gf ~ 600gf)
Storage Temp（℃）	-40～+85

 

 

Environment and Mechanical

 

 

Properties	Test condition	Conformance	Test result
Vibration	10-55Hz, 1.5mm, 60min	IEC61300-2-1	≤0.2dB
Mating Durability	1000 Mating, clean every 25 mating.	IEC61300-2-2	≤0.2dB
Impact	1.5m, 8 drops	IEC61300-2-6	≤0.2dB
Strength of Coupling Mechanism	40N, 10Min, L=22-28cm	IEC61300-2-12	≤0.2dB
Temperature Cycling	40ºC to +75ºC, 40 cycles	IEC61300-2-22	≤0.2dB
Temperature humidity cycling	40ºC， 95%， 96Hr	IEC61300-2-21	≤0.2dB
Operating Temperature	-40ºC to +85ºC		≤0.2dB
Storage Temperature	-40ºC to +85ºC		≤0.2dB

 

Products Highlights

 

CS UPC to CS UPC Fiber Optic Adapter Coupler

 

Products Group

 

CS UPC to CS UPC Fiber Optic Adapter Coupler SM 2F 2 Channel

Note: CS™ is a trademark of Senko Advanced Components, Inc. 2016-2020 © All Rights Reserved.