4 PCM Voice Telephone Media Converter Over Fiber with Ethernet

What Is 4 PCM Voice Telephone Media Converter Over Fiber with Ethernet?

Description:

4 PCM Voice Telephone Media Converter Over Fiber with Ethernet The PCM Voice Telephone system over one Fiber Optic S/M up to 20Km (12.4miles) and M/M up to 500m. with one 10/100Mbps Ethernet for network extending, also can use for IP camera with RJ45 connector,SC fiber interface(FC/ST/LC optional). , S/M 40Km/60Km/80Km optional.

A PCM Voice Telephone Media Converter Over Fiber with Ethernet is a device that allows for the transmission of voice signals over fiber optic cables. PCM stands for Pulse Code Modulation, which is a digital representation of analog signals. In the case of telephone signals, PCM is used to convert the analog voice signals into digital signals that can be transmitted over a digital network.

The media converter takes the digital PCM signals and converts them into an optical signal that can be transmitted over a fiber optic cable. At the other end of the fiber optic cable, another media converter converts the optical signal back into a digital PCM signal that can then be decoded and played back as an analog voice signal.

The Ethernet port on the media converter provides a means of connecting the device to a network. This allows for the transmission of the voice signals over an IP network, which can be useful in situations where it is necessary to connect remote locations or where traditional telephone lines are not available.

Overall, a PCM Voice Telephone Media Converter Over Fiber with Ethernet can be a useful tool for transmitting voice signals over long distances or for connecting remote locations. It can also be used in situations where traditional telephone lines are not available or where the cost of installing and maintaining traditional telephone lines is prohibitive.

Features:

• 1. Support Protocol: IEEE 802.3, IEEE 802. 1Q (VLAN)
• 2. Transmission distance : singlemode fiber up to 20Km, Multimode fiber up to 500meters.
• 3. Network bandwidth: 10-100Mbps (per network port) full duplex, half duplex fully adaptive
• 4. Adopt traditional PSTN normal voice, each voice occupies a 64K channel, support caller ID and fax.
• 5. Compact design, beautiful appearance and convenient installation and operation.
• 6. Complete status display function for easy maintenance and management.
• 7. Single-mode and multi-mode adaptive, simplex SC interface

4 PCM Voice Telephone Media Converter Over Fiber with Ethernet Size

4 PCM Voice Telephone Media Converter Over Fiber with Ethernet Diagram

Phone RJ11 port specifications:

2. ● Voice coding: PCM coding, 64Kbps per voice
3. ● Crosstalk attenuation: ≥65dB
4. ● Balanced noise: ≤63.7dBmop
5. ● Insertion loss: -3 ± 0.75dB
6. ● Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
7. ● Relay port (FXO): connected to the switch
8. ● Two-wire AC input impedance: 200+680//0.1 Ω (three components)
9. ● Ringing voltage: 35 ~ 150V
10. ● Ringing frequency: 17~60HZ
11. ● Return loss: 20 db
12. ● User Interface (FXS): Connect to the user’s telephone
13. ● Two-wire AC input impedance: 200+680//0.1 Ω (three components)
14. ● User line loop resistance: less than 1KΩ (including phone)
15. ● Ringing voltage peak-to-peak value: 110~150V
16. ● Ringing frequency: 22~28HZ
17. ● Feed voltage: 28V
18. ● Feed current: 20~50mA;
19. ● Return loss: 20 db
20. ● Bell flow: AC90 plus or minus 15V

Ethernet RJ45 port specifications:

1. ● Rate: 10M/100M, full duplex, half duplex fully adaptive
2. ● Actual transmission bandwidth: 50Mbps per network port
3. ● Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
4. ● Physical interface: RJ45, support AUTO-MDIX (cross line straight line adaptive)

Package include:

1. ● 1x telephone Transmitter
2. ● 1x telephone Receiver
3. ● 2x power supply adatper (plug US/EU/UK/AU optional)
4. ● User Manual