1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator

1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator

1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator Female to female Fixed fiber attenuators from mefiberoptic.com offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed fiber attenuators can limit (attenuate) the amount of light passing through to the exact levels your project or application requirement. These precise attenuation levels provide for highly accurate performance.

LC Female to LC Female Fixed fiber attenuator are available for SM UPC (1-20dB) and SM APC (1-20dB).

• Product Name : LC Female to LC Female Plug-in Fixed Fiber Attenuator
• Fiber Connector : LC
• Connector Gender ; Fixed Female to Female
• Return Loss : ≥55dB
• Attenuation : 1~20dB
• Polarization Dependent Loss : ≤0.2dB
• Max Optical Input Power : 200mw
• Operating Temp : -40~80°C

1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator is a device that is used to reduce the strength of an optical signal in a fiber optic network. The attenuator connects two LC connectors, which are commonly used in fiber optic networks, and reduces the signal strength by a specified amount, usually between 1 and 20 decibels (dB).

The LC Female to LC Female Plug-in Fixed Fiber Attenuator is a plug-in type of attenuator, which means that it can be easily inserted into an LC port on a patch panel, transceiver, or other device without requiring any additional tools or equipment. The attenuator is fixed, which means that the amount of attenuation is pre-determined and cannot be adjusted.

Attenuators are used in fiber optic networks to ensure that the optical signals are not too strong, which can cause distortion or damage to the equipment. In some cases, the optical signals may be too strong due to factors such as the length of the fiber optic cable or the power of the light source. Attenuators can be used to reduce the signal strength to a suitable level, which improves the overall performance and reliability of the network.

LC Female to LC Female Plug-in Fixed Fiber Attenuator is commonly used in applications such as fiber-to-the-home (FTTH), cable television (CATV), and high-speed data transmission networks. The attenuator can be used with both single-mode and multimode fiber optic cables, and is available in different types of connectors and attenuation levels to meet specific application requirements.

• Attenuation range: The attenuation range of the attenuator is typically between 1 and 20 decibels (dB), although some models may have a wider or narrower range. The amount of attenuation needed depends on factors such as the length of the fiber optic cable, the power of the light source, and the sensitivity of the receiving equipment.
• Connector type: The 1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator is designed to connect two LC connectors, which are commonly used in fiber optic networks. The attenuator can also be used with other connector types such as SC, ST, and FC by using a hybrid adapter.
• Construction: The attenuator is typically constructed using high-quality materials such as ceramic ferrules and metal housing. The ceramic ferrules help to ensure precise alignment of the fiber cores, while the metal housing provides durability and protection.
• Plug-in type: The attenuator is a plug-in type, which means that it can be easily inserted into an LC port on a patch panel, transceiver, or other device without requiring any additional tools or equipment. This makes it easy to install and remove as needed.
• Fixed attenuation: The attenuation level of the attenuator is fixed and cannot be adjusted. This makes it a simple and cost-effective solution for reducing signal strength in fiber optic networks.
• Application: The 1~20dB LC Female to LC Female Plug-in Fixed Fiber Attenuator is commonly used in applications such as fiber-to-the-home (FTTH), cable television (CATV), and high-speed data transmission networks. It can be used with both single-mode and multimode fiber optic cables and is available in different attenuation levels to meet specific application requirements.

Overall, LC Female to LC Female Plug-in Fixed Fiber Attenuator is a reliable and cost-effective device that helps to improve the performance and reliability of fiber optic networks by reducing the strength of optical signals to a suitable level.

LC to LC Female Fixed Fiber Attenuator Specifications:

Features:

•  Precise Attenuation Values
•  Low PDL&Insertion Loss
•  Precise Reflection Polishing
•  Fast Connection
•  Stable attenuation, highly Reliable
•  Complies with industry green initiative such as ROHS
•  GR910 Compliant

Fiber Attenuator Application:

Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single- mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications

Packaging:

This easily taken and well-protected fiber optical cable package has been labelled and marked by us as de- fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized.

Looking for ideal LC Female to LC Female Plug-in Fixed Fiber Attenuator Manufacturer & supplier ? Mefiberoptic.com have a wide selection at good prices to help you get creative. All the LC Female to LC Female Plug-in Fixed Fiber Attenuator are quality guaranteed. We are China Origin Factory of LC Female to LC Female Plug-in Fixed Fiber Attenuator. If you have any question, please feel free to contact us.