Patch Cord Production Line Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

HORIZONTAL/rtical PNEUMATIC CRIMPING MACHIN
1.  For the connector assembly and the ceramic ferrule and metal  tail stock assembly of other products Crimp.
2.  Use air pressure of not less than 0.6 ~ 0.9Mpa, the maximum pressure 1000kgf.
3.  By replacing the crimp tooling can be adapted to different parts assembly and crimping.
4.  Pressure adjustable to adapt to different products.
5.  Simple, reliable and efficient processing.
6.  Stable quality.
7.  Maintenance, maintenance is simple and convenient.
8.  Provide connector crimping dies, adapters and metal tailstock crimping dies.
9.  According to customer needs, customized different crimping tooling.
10.Voltage: DC12V
11.Weight: 55Kg
12.Max. Pressure: 1000Kg
13.Max. Air pressure: 0.8Kg
Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine
Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

Tail ring electric crimping machine
1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly  of other products crimp.
2. By replacing the crimp tooling, can adapt to different parts assembly and the crimping.
3.  Pressure can be adjusted to adapt to different products.
4.  Simple, reliable, high processing efficiency.
5.  Stable quality.
6.  Maintenance, simple and convenient.
7.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
8.  According to customer needs, custom-made different crimping tooling.
Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

MPO special pneumatic crimping machine

1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly of other products crimp.
2.  Use air pressure is not less than 0.6 ~ 0.9 Mpa, the maximum pressure for 1000 kgf.
3.  By replacing the crimp tooling, can adapt to different parts assembly and the crimping.
4.  Pressure can be adjusted to adapt to different products.
5.  Simple, reliable, high processing efficiency.
6.  Stable quality.
7.  Maintenance, simple and convenient.
8.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
9.  According to customer needs, custom-made different crimping tooling.
Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

READ MORE ...
Air Blowing Micro fiber Optic Cable

One shot crimping machine
1.  This machine is used for crimping aluminum ring during the manufacture of optical fiber patch cord. The work is done by one shot,
steady and not easy to loose.
2.  The booster cylinder’s max pressure could reach 1 ton.
3.  The crimping mold is casted at one time. Heat treatment enables the hardness reach HRC63.
4.  It can also used for MPO, MTP, 7.0mm cable crimping.    
5.Voltage: DC12V
6.Weight: 55Kg
7.Max. Pressure: 1000Kg
8.Max. Air pressure: 0.8Kg
Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

Automatic ceramic ferrule crimping machine
Used for ceramic ferrule metal flange crimping.
Use PLC control system. Automatic crimping is better and quicker.
Crimping fixture can be replaced for different components assembly or crimping.
Easy operating and high working efficiency are realized.
Stable working quality and easy for repair and maintenance.
Crimping mold for connectors, adaptors, and metal flange is available at request.
Customized crimping tool is available.
Voltage: 220-240V
Power: 700w
Weight: 160kg
Size: 750*1200*860mm
Crimping efficiency: 4200-6000pcs/hr
Operating mode: Automatic

Patch Cord Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

https://mefiberoptic.com/product-category/production-line/patch-cord-and-pigtail-manufacture-line/

wiki

Leave a Reply

Your email address will not be published.